Rüster stand alone comfort controllers & thermostats
Series of bi-metal room
The AS200 series of bimetal room thermostats are special designed to control the temperature in single rooms. The thermostats can be employed in air-conditioning systems to drive two pipe fan coil units. It controls through a SPDT contact a 2 position valve (VSX series) witch operates in heating or cooling mode depending on the season changeover.
AS2051x SPDT 5(2)A 250Vac - summer/winter changeover- 3 speed fan selector- range 10..30°C
AS2061x SPDT 5(2)A 250Vac - range 5..30°C
AS2071x SPDT 5(2)A 250Vac - summer/winter changeover- range 5..30°C
of single room fancoil controllers
AX236 is an ON/OFF room thermostat for conditioning and 3 fan speed control. The AX236 room thermostat is used in conditioning plant and it is particularly suitable for residential and office applications. The AX236 room thermostat is composed of a white ABS housing and a base containing the electronic card and terminal board. Power supply 230 V~ 50 - 60 Hz, temperature range 5T30 °C
of single room controllers
AX526 is a proportional room thermostat equipped with two proportional output 0..10 V-, power supply 24 V~. AX526 is used in heating, thermal process, air-conditioning systems, in civil and industrial plants whenever temperature control is required. Control is carried out by a 0..10 V- proportional control of a motorised valve or of two motorised valves in sequence. Typical applications are: reheating coil control with V.XT/MVT or V.B/MVB56 valves, small A.H.U. - D.P.C, multizone plants, heating/cooling coils with V.XT/MVT or V.B/MVB56 valves in hot/cool sequenc
Power supply 24vAC - 2x 0..10Vdc outputs (heating & cooling)
Power supply 24vAC - 2x 0..10Vdc outputs (heating & cooling)-On/Off switch- 3 fan speed controller
Power supply 24vAC - 2x 0..10Vdc outputs (heating & cooling)-On/Off switch electric heater output & LCD
Power supply 24vAC - 2x 0..10Vdc outputs (heating & cooling)-On/Off switch- 3 fan speed controller & LCD
Apollo Series Touch screen comfort controllers
With the introduction of the Apollo series of touch screecomfort controllers. a perfect mix of aesthetics, intuitive operations and performance in an amazingly affordable package.
Based on the highly successful chamelean format, the Apollo additionally brings an attractive touch screen with unique "Touch to Adjust" logic. The comfort controller has a input for a remote sensor, outdoor sensor, outputs for fan control (3 speed), and 24Vac outputs for cooling and heating. Standard the controller is supplied with logic for a cool/heat system or heat pump system.
Features:- 24Vac or Battery powered (2xAAA)
- Large Backlit LCD Touch screen
- Security Logic inc Key lock & Limit control
- 7 days, 5+2 day or manual operation
- Programmable Fan logic
- Heat/Cool & Heat pump logic
- single & multistage control
- Remote sensor input
- Outside sensor input
|SMT101||Apollo II||Only heating||179,25||C|
DGTOUCH Touch screen comfort controller
DG-TOUCH is a programmable room thermostat with a wide touch screen display. The user can set 3 different temperature levels with a time schedule up to 24 events per day. DGTouch is powered with 2 batteries and it designed for wall mounting. DGTouch can control both heating and colling systems with a variable hysterisys. The wide touch screen display allow a very easy programming and set up also for not skilled personnel.
- Summer/Winter operation mode;
- automatic programming with 7 programs for Winter operation mode (modifiable) and 7 programs for summer operation mode (modifiable);
• ON/OFF or proportional temperature control;
• 5 settable temperatures:
T1, T2, T3 in automatic operation, Tm in manual operation, Toff
in off mode (frost protection
• minimum regulation interval: 1 hour;
• switching delay settable among 15,30 or 45 minutes (independent for each hour);
• monostable relay output 5A/250Vac
• password protected lock keypad;
• automatic summer/winter time change;
• display with blue blacklighting (activation afeter a key pressure) to check operation status, time and day and temperature;
• digital input for clean
contact with whom to switch on or of
• plastic base for wall-mounting installation or to
• terminals in the back of the instrument for
connection to the
• touch screen keyboard for the instrument programming.
Rüster are pleased to present you with the SMT700 Elegance wall comfort controller. The controller is designed to be extremely attractive yet unobtrusive. Simple to use while still having advanced control capability. This comfort control option has a room unit with large display and temperature sensor. The room unit is connected to the controller by the magic wiring solution of Smart Temp.
|7day 4 or 2 event programming or non programmable mode (with night set back)|
|Auto season changeover between Heat & Cool|
|Built in Active 2 zone control (With zone temperature display)|
|sinle & 3 speed Fan control with Auto fan speed (set by system installer)|
|Multistage equipment control|
|Built in fan coil smart control (Warm start & residual Heat/Cool run on)|
|Equipment fault/Occupancy inputs (2) with status display on the LCD|
|Build in economy function using outside air for free heating & cooling|
|Flow vertification interlock|
|Large Backlit liquid Crystal display|
|Powered from 24Vac or line voltage|
|Magic touch buttons|
The SMT-770 Chameleon platform is special designed to have a flexible control solution for comfort control with high energy savings.
With the SMT-770 Chameleon you get more then 198 control options in one housing!
Easy to install
The SMT770 Chameleon is not only easy in use, maintanance free but also very easy to install! All connections are made on the backlit of the controller, with easy programming in mind our engineers developed a installer menu witch is easy in use! To program the controller you do not need a large manual anymore!
With the Chameleon engine we provide a platform witch is designed to save energy! Against traditional systems the SMT-920 saves up to 40% on the energy use!
|Auto season change over|
|Selectable programmable or manual mode|
|Heat cool or heat pump logic|
|High & Low balance points|
|Keyboard and/or temperature locks|
|Occupancy sensor inputs|
|Adaptive recovery (optimised start)|
|Smart fan logic for commercial control|
|Outside air temperature display|
|Volt free relays|
|Large Backlit EL display|
|Integrated modbus option|
|Replace almost all 24V thermostats & controllers|
|RS-1||Room temperature sensor||23,63||C||
|RS-W||Wireless temp sensor||159,08||C||
The SMT 131 Smart comfort controller is designed with estetics, innovation and high quality in mind.
This unique solution offers not only easy install and easy in use but is robust has different control possibility's.
With the large Touch screen with dimmable backlight, the integrated Modbus communication protocol, and his low profile makes that the SMT131 Smart can be easely integrated in many BMS systems.
The SMT-131 is developed with the latest innovative technology's. With special energy saving logic integrated in the control stratagy of the SMT131 it is possible to save up to 40% Energy against traditional control systems.
The SMT-131 is developed with energy saving and easy use in mind! One of the unique features of the SMT 131 Smart is the integrated hotel room logic. To be sure that the hotel guest has the right comfort when he is entering the room, the SMT-131 can be equiped with the special OC-3D occupancy module. This module has a 230V @ 10A output for controlling the electra in the room, a volt free output to activate the SMT131, several occupancy sensor inputs and a input for a door switch. [read more]
|Bright Backlit Touch screen|
|Single or three fan speed control|
|Heat pump or heat cool control logic|
|0..10Vdc valve control logic|
|Extensive installer options menu|
|Integrated Modbus communication|
|Optional remote sensor(s) available|
|Optional doorstation input|
|Door Bell function|
|RS-1||Room temperature sensor||23,63||C||
|RS-W||Wireless temp sensor||159,08||C||
The SMT-AZC Zobe VAV controller is special designed to control the air flow in a single zone. The Controller is profided with a upstream mounted flow sensor.
Easy to install
The SMT-AZC is easy to install.Based on the same housing as the unique SMT-770 Chameleon the controller has his connections on the backplate of the housing. Our engineers have developed a easy to use menu with password protection.
The SMT-AZC is developed with high comfort and energy savings in mind! Unique with the SMT-AZC is the Modbus communication witch will provide the building managment system with the needed information to be able to control based on request!
- Large Backlit liquid Crystal display
- VAV control of single zone
- Temperature controlled
- 24Vac powered
- Incl. upstream flow sensor
- Modbus RTU
- Easy installation
SMT880 Falcon Unique Touch screen comfort controller
Finding the right HVAC controlis often not an easy task. Modern consumers expect an attractive and easy to use thermostat featuring all the modern features. The SMT880 Falcon features a full colour 5"touch screen waith a modern interface and attractive icons. Tapping icons open pages that permits the adjustment of comfort levels, system modes and holiday scheduling that are all laid out in an attractive and intuitive format. The Falcon is that easy to use that the user should never need read the manual or call tech support for help using their Falcon.
The capabilities of the Falcon does not stop with a fancy userinterface. The Falcon can easily be expanded to include individual temperature control for up to 9 zones by simply addition of the zone control module.
The controller can be fitted with up to a maximum of 4 wall units.A change made on any one of the wal units will automatically synchronize, updating information to the other wall units.
Each wall unit has the ability to turn zones or the HVAC system On or Off or adjust individual zone temperatures. With the Falcon when using multiple wall units you can adjust in every zone the comfort level.
Also the SMT880 can be controlled by smartphone or tablet, simply by connecting the controller to the ethernet or adding the WIFI modules. Especcially for smartphone or tablet control SMart temp has developed a easy to use App.
|Large 5"full coulour Capacitive Touch screen|
|Up to 9 temperature controlled zones|
|Ful Scheduling for each zone|
|Iphone, Android and web page control|
|Rh & temperature monitoring & control|
|Single or 3 speed fan conctrol|
|Heatpump or heat cool control logic|
|0..10Vdc Valve control|
|Photo frame function|
|Light sensor for automatic backlight control|
|optional with pressure control possibility's|
|Falcon zone module||275,00||C|
|Falcon touch panal||650,00||C|
|RS-1 Room sensor||23,63||C|
|V.X thermal valves||Read more|