Waterleak & condensation protection

Select your language:|EN|||


Welcome at our website!

Our company is grounded at 1949 in Berlin Germany. The name Rüster stands for High Quality and Service since the start of the company.

Rüster develops and manufactures a wide range of sensors and transmitters for Industrial and HVAC proposes. With our new line of products we decided that it was time to show the world our Unique solutions for HVAC applications.

Our products are not only Innovative and High Quality but also excellent priced!


Rüster building controls is a part of Paul Rüster & Co GmbH

Paul Rüster & Co.GmbH


Paul Rüster & Co GmbH grounded in 1949 in Berlin Germany by Paul Rüster. Rüster is from the start of the company well known as developer and manufacture of innovative and High quality pressure transmitters, resistance thermometers for control of motors and generators, humidity sensing etc (with or without EX approval)


In our industrial delivery program there is a wide range of EX sensors and transmitters, sensors and transmitters special developed for sea going vessels, trains and offshore etc. All these solutions can be ordered with or without calibration!


Our success as a producing company is largely a function of how quickly it responds to new market requirments. Therfore our working methods are state of the art. In certain areas we cooperate closely with Universities, Institutes and partners.

Paul Rüster & Co GmbH is a ISO 9001 approved company.
Want to know more about our possibillitys and solutions? Contact our sales department for more information!


Rüster water leak & condensation prevention

The Rüster Liquid pressure sensors are designed and manufactured with high accuracy and long term stability in mind. With our expierance in industrial applications for measurment of liquids or gases we decided to use the same high quality materials in our HVAC Liquid pressure program. 



Rüster condensation prevention

When cooling systems are used in a building condensation of piping, cooling ceilings/fancoils etc is always  a possibility. Condensation can cause a lot of damage. Thats why it is very important to monitor the "room"conditions and monitoring the temperature in the piping. But even than condensation can take place in some aereas. 

Especially for this siuations Rüster has developed RWDCP condensation prevention controller.


The RWDCP is designed to meet the requirements for a low cost device to provide early warning of condensation conditions.

The sensor provides either a volt-free contact or current output and is housed in a small easy to install enclosure. The sensor has a adjustable setpoint and LED indication of status.

Type

Price   D.G.
RWDCP-22 m lead cable105,96 B
RWDCP-55 m lead cable126,14 B


Rüster water detection

The damage to a building or equipment inside when piping or even rain water is leaking into the building can be substantial. When a event lik this is happening it is imprtant to detect this problem as soon as possible to prevent unnes-sesary damage.

Just for these cases Rüster building controls profides a wide range of water leak detection equipment.



RWDM series of controllers

The RWDM series of waterleak alarm controllers is designed for use with the RWDP pointsensor, RWDC detection cable and the RWDR Rain sensor.

The modules have a LED indication of the water leak status and a sounder that can be enabled or disabled. The relay output can be used in manual and auto reset, and can be used as an alarm signal for connection to a BMS controller or remote alarm annunciation panal.

The cable excitation used is an isolated AC signal witch ensures the detector cable will not be subject to oxidation or erosion over time. Avoiding the degradetion problems associated with DC systems.

Type

Price   D.G.  
RWDM-2424 Vac/dc controller113,46 B
RWDM-230230 Vac controller136,85 B


RWDP water detection point sensor

The RWDP water detection point sensor is designed to detect water leak at localised points. Standard the sensor is provided with 2 m connection cable.

The sensor must be used in combination with the RWDM series water leak detection controllers and not be directly connected to a BMS system


Type
Price  D.G.  
RWDPWater point sensor 2 m43,28 B 


RWDC water detection cable

The RWDC water detection cable sensor is designed to detect water leak at larger areas as server rooms, technical rooms etc. Standard the sensor is provided with 3 m connection cable.

The sensor must be used in combination with the RWDM series water leak detection controllers and not be directly connected to a BMS system


Type

Price   D.G.  
RWDC-2detection cable 2 m43,28 B
RWDC-5
detection cable 5 m
61,41 B
RWDC-10
detection cable 10 m
98,84 B
RWDC-15
detection cable 15 m
136,27 B
RWDC-20
detection cable 20 m
173,70 B
RWDC-25
detection cable 25 m
212,88 B
| Login | Shoppingcart |

Products in Shoppingcart:

Follow us on:

  


Rüster





Read More!


Rüster Product News


RBC-I/O
Flush mounted I/O module with Modbus RTU communication protocol. The unique and compact RBC-I/O is especcially designed to meet the wishes of our customers for a compact contol module witch can switch lightning , sun blinds etc.



For more information about this new unique product, contact our sales department!



Read More!


Rüster News


GL CERTIFICATION

Rüster is proud to inform you that our industrial resistance thermometers and thermocouples are now available with GL certification




GL certification is especially needed when used in Maritime environment

Read more!


Rüster Worldwide


We deliver Worldwide!




Ask our sales department about your possibility's!


Read more!



DATA PRIVACY | DISCLAIMER | IMPRINT

Copyright © 2014. All Rights Reserved.